For L-brackets for Equalizer weight distribution systems we have the part # EQ90-02-5150. If you needed the L pins and clips you also would need the part # EQ95-01-9430. view full answer...
Yes the Curt brake controller install harness part # C51362 does fit your 2019 Lexus LX 570 with the factory tow package and is the correct harness to use with theTriFlex NEXT # C24VV. view full answer...
Since your 2017 Lexus LX 570 has a factory 7-way all you need to install the Redarc Tow Pro Elite part # RED44FR that you referenced is the correct install harnesses part # 3040-P with # 331-TPH-017 and you'd be set!
The mounting panel part # 331-TPSI-001 would also work great too. view full answer...
Thule has an adapter designed specifically for this with the part # TH27PQ. This will convert the hardware of your Motion XT box so that it can attach to the top channels of a roof rack or a platform like you have. view full answer...
While we don't have the exact axle you are looking for we do have the Timbren Axle Less kit part # TASR35HDS06 which is an axle-less design that basically attaches directly to the trailer frame. This has a 2 inch lift built into it as well to help with ground clearance. view full answer...
Since your 2016 Lexus LX 570 has a 7-way, you can install a brake controller without hardwiring, with just the brake controller and wiring harness. The easiest to use is a wireless brake controller from Curt:
- Curt Echo Wireless Trailer Brake Controller # C51180
For the Echo there is no dash removal, no adapter needed, and no hassle at all. Just plug it into the 7-way on your Lexus, download the app on your phone, and adjust the settings to your liking. That's all there is to it, and... view full answer...
The closest adapter we have to what you need is the Torklift part # TLW6021. This is a 7-way adapter that has a male end on one side and a female on the other. It measures a little longer than you requested at 24 inches though.
Your ideal solution would be to remove your current 7-way and install a longer one on your trailer like with the part # H20042 that is a 3 foot long 7-way plug and lead. You could trim this down to match your trailer length needs as well. view full answer...
Your 2014 Lexus LX570 is rated for 7,000 lbs towing capacity based on my research. If your tongue weight is 700-800 lbs, then the 1000 lbs system is a great option. With whatever system you choose, the total tongue weight is the biggest factor in getting the correct system. The total tongue weight is the loaded trailer tongue weight along with any cargo behind the rear axle of your Lexus.
Either the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET or the... view full answer...
The 10K and 12K Equal-i-zer Weight Distribution Systems like part # EQ37100ET and part # EQ37120ET use different heads and spring bars so if you wish to switch back between the two capacities you will need both of these items which I have listed for you below.
Equal-i-zer 10K Head part # EQ90-02-1000
Equal-i-zer 10K Spring Bars part # EQ90-01-1099
Equal-i-zer 12K Head part # EQ90-02-1200
Equal-i-zer 12K Spring Bars part # EQ90-01-1299 view full answer...
If you want to use # WG54006-043 then you just need the vehicle end, such as # PK12-707E, since it already has the trailer end on it.
We have some ready-made 7-Way extensions that you can use such as # 20027 or # C56080 which are 7 feet long. We have a shorter option, # TLW6021, which is 21 inches long. And we have a 10 foot long model # TLW6510. view full answer...
I may have a solution for you, but the clamps on the Yakima OffGrid # Y07138-08 are roughly 8" from the sides. Additionally because this box is 40" wide and you're adding a 36" cargo box next to it, you would need at least 78" of bar space to ensure that both items are fully supported by the crossbars on your 2013 Lexus LX570. You don't want part of the basket hanging over unsupported as it's going to create an unstable situation on your roof.
Instead, I recommend using the Yakima SkinnyWarrior... view full answer...
The Rhino-Rack Pioneer Platform Rack part # JA9738 is a confirmed fit for your 2011 Lexus LX570 if it has a naked or bare roof. It connects directly to attachment points on your Lexus provided by the factory.
If this is too large or you have factory rails that run down the side of the roof then we have to go another route. This is using a standard crossbar system like the Rhino-Rack Vortex Aero Crossbars Roof Rack System part # RRVA126B-2 and part # RRSX100. This will give you the base... view full answer...
I do have a great solution for you, however we don't have a platform-style bike rack (Kuat or otherwise) that can sit low enough to avoid interference with the swinging rear door on your 2018 Lexus LX 570. All of the Kuat platform carriers will sit about 10 to 12 inches above the center of the hitch pin hole, whether down for use or tilted back for rear cargo access.
For your Lexus LX 570 I think your best option will be with the Kuat NV 2.0 Platform Rack # NV22G you were looking at paired... view full answer...